How to Substitute Burners on a Weber Grill

Even though Weber is most recognized for their line of charcoal grills, they also make a massive range of significant-good quality gas grills that are popular with consumers. If your grill is just not heating up all the way or you have uneven heat, the burners are most probable the challenge. This is a walkthrough to help you verify that the burners do want substitute as very well as how to do it.

Do the burners require to be replaced?

The initially step is to make certain your burners are in reality outside of fix. Start out by generating sure the propane tank has adequate gasoline then appear for leaks in the gas hose by working with a answer of drinking water and dishwashing liquid. If you see bubbles in the alternative, you can find a leak in the line. In this scenario you can want to buy some economical alternative grill parts to correct the leak. Subsequent, try lighting the burners to substantial for 10 minutes. Verify the spider screens for any blocks that may avert propane from achieving the burner itself.

You can also attempt resetting the excess movement protection device. To do this, transform all burners off and flip off the valve on the propane cylinder. Disconnect the regulator valve, switch all burners to high and wait around just one moment. Now, change the burners off once more and reconnect the regulator valve. Change the valve on the tank back on and check the burners.

If these techniques did not get the job done you will will need to exchange the burners of your grill. This is how to do it.

How to Swap Weber Grill Burners

1. Get the correct Weber grill sections. You can need to have your product range to make confident you purchase the correct burners. You can both get grill parts on line to help you save money or see if your local components store has them in inventory.

2. Now, convert off the valve on the propane tank and disconnect the cylinder, eradicating it from the tank, as well as the cooking grates and flavorizer bars.

3. Remove the control panel by having out the screws keeping it in place.

4. Loosen the burners by turning the nut beneath with a pair of pliers.

5. Pull the burner up at an angle to remove the burner together with the tube assembly.

6. Insert new burners in the exact same situation and make confident the burner tubes suit inside of the venturi tubes guiding the regulate panel. The burner tubes never really connect to the venturi tubes but ought to be at the very least 1/2″ inside of so they will not turn into disconnected if the grill is bumped.

7. Reattach the locking nut underneath the grill to protected the burners in spot.

8. Reattach the manage panel and set the cooking grate, flavorizer bars and propane tank again in location.

9. Reattach the propane fuel regulator to the valve and turn it back again on.

That’s all it normally takes to replace the burners on your Weber grill. While Weber grill parts are designed well, all burners eventually put on out and will need changing. Make sure you buy the appropriate parts and you are going to locate it really is straightforward to do the operate by yourself and preserve cash without having acquiring a model-new grill.